From the trained lab rats at Eversoul Resin Industries comes a new micro-brewed epoxy resin system. Our chemically-engineered resin system has been developed specifically to meet the needs of the surfboard/SUP manufacturing community. The system is a 2 part, 100% solids, no VOC epoxy resin/hardener combination. It features a convenient 2:1 mix ratio by volume (100:44 parts by weight). It has been designed for wet hand lay-up laminations and has an excellent balance of low viscosity for rapid wet out and good air release; quick thin film set time to eliminate drain out; non-blushing, no shrinkage cure even in low temperature and high humidity; self leveling with high gloss; excellent UV stability; and high strength. In addition, it has been engineered to have a lower peak exotherm temperature than most fast setting epoxies, which aids in fin box installations without foam core melting. The System offers the choice of 3 resin and 5 hardener formulations to the surf/SUP market. Combinations of any of the resin and hardeners will give bright, clear laminations and smooth easy to sand to hot coats with unsurpassed long-term resistance to yellowing and chalking.
Write Your Own Review