Search results for: 'gun'

Awlcraft 3000 Technical Support Guide Awlcraft 3000 is a professional-grade, two-component polyurethane marine topcoat designed for high-gloss yacht finishes. This guide covers mixing ratios, spray setup, film thickness, drying times, repairs, maintenance, and common contractor questions. If you are spraying Awlcraft 3000 and need technical clarity, this is your complete support resource. What Is Awlcraft 3000? Short Answer: Awlcraft 3000 is a buffable, repairable, high-gloss p...

Awlgrip Yacht Paint Application Guide Complete professional guide to surface preparation, priming, fairing, and applying Awlgrip marine coatings. Built for boat builders, professional painters, and first-time users who want a flawless finish. Guide Contents Overview of Awlgrip Coating Systems Surface Preparation Fundamentals Preparing Fiberglass & Gelcoat Preparing Aluminum Preparing Steel Preparing Wood Fairing Compounds & Surface Correction...

Hand Laminating & Spray-Up Technical Support Hand laminating and spray-up are two of the most common open molding processes used in fiberglass fabrication. While both methods rely on similar materials, success depends on understanding the differences in application technique, resin behavior, and process control. At Fiberglass Florida, we provide technical support to help fabricators, repair yards, and builders choose the right laminating method and materials for their project — a...

Awlgrip Yacht Paint Application & Technical Guide Professional yacht finishing procedures, surface preparation standards, and Awlgrip system application guidance. Surface Prep → Fairing → Primer → Topcoat → Cure → Finish Surface Preparation Cleaning procedures, sanding standards, two-cloth solvent wipe method, and contamination removal. View Surface Prep Guide → Primers & Sealers 545 Epoxy Primer...

MEKP Catalyst Calculator & Mixing Guide (oz, mL, cc) MEKP Catalyst (Methyl Ethyl Ketone Peroxide) is used to cure polyester resin, vinyl ester resin, and gelcoat. The correct mix ratio is critical to ensure proper curing, strength, and finish quality. Standard mix: 1.5% MEKP (about 2 oz per gallon of resin). Important Mixing Notes This information is based on MEKP 925 and tested at 77°F (25°C) . These are estimates and may vary depending on the resin system, shop conditions, and ap...