Search results for: 'tone 3'

Preparing Gelcoat for Awlgrip Paint Systems When applying Awlgrip or Awlcraft coatings over fiberglass boats, proper preparation of existing or new gelcoat is critical for long-term adhesion and finish quality. Most adhesion failures in marine paint systems occur because of poor surface preparation rather than product failure. Why Gelcoat Preparation Matters Before applying Awlgrip systems the gelcoat surface must be: Free of wax and contamination Properly sanded to ...

Awlcraft 3000 Technical Support Guide Awlcraft 3000 is a professional-grade, two-component polyurethane marine topcoat designed for high-gloss yacht finishes. This guide covers mixing ratios, spray setup, film thickness, drying times, repairs, maintenance, and common contractor questions. If you are spraying Awlcraft 3000 and need technical clarity, this is your complete support resource. What Is Awlcraft 3000? Short Answer: Awlcraft 3000 is a buffable, repairable, high-gloss p...

MEKP Catalyst Calculator & Mixing Guide (oz, mL, cc) MEKP Catalyst (Methyl Ethyl Ketone Peroxide) is used to cure polyester resin, vinyl ester resin, and gelcoat. The correct mix ratio is critical to ensure proper curing, strength, and finish quality. Standard mix: 1.5% MEKP (about 2 oz per gallon of resin). Important Mixing Notes This information is based on MEKP 925 and tested at 77°F (25°C) . These are estimates and may vary depending on the resin system, shop conditions, and ap...

      Fiberglass Florida · Awlgrip Technical Hub High Build Epoxy Primer Awlgrip Application Guide · D8002 / D3002 The definitive Florida resource for Awlgrip High Build Epoxy Primer — spec data, spray settings, coverage calculations, and pro tips for our heat and humidity. Two-Component Epoxy High Build Surfacer Above Waterline Only Fiberglass & Wood Florida Climate   Explore Specs Coverage Calc Mixing Spray Se...

  FF · AWLGRIP GUIDE ⌕   EDITION 22 Fiberglass Florida · Florida's Awlgrip Technical Hub Awlgrip Application Guide The complete professional reference for Awlgrip coatings — surface preparation, spray gun setup, primers, topcoats, defect diagnosis, and repair. Adapted for Florida's climate by Fiberglass Florida. Surface Prep Spray Gun Settings Primers Topcoats Paint Defects Maintenance & Repair Florida Climate ...