Search results for: '3002'

Preparing Gelcoat for Awlgrip Paint Systems When applying Awlgrip or Awlcraft coatings over fiberglass boats, proper preparation of existing or new gelcoat is critical for long-term adhesion and finish quality. Most adhesion failures in marine paint systems occur because of poor surface preparation rather than product failure. Why Gelcoat Preparation Matters Before applying Awlgrip systems the gelcoat surface must be: Free of wax and contamination Properly sanded to ...

D8002 & D3002 

Awlgrip Yacht Paint Application & Technical Guide Professional yacht finishing procedures, surface preparation standards, and Awlgrip system application guidance. Surface Prep → Fairing → Primer → Topcoat → Cure → Finish Surface Preparation Cleaning procedures, sanding standards, two-cloth solvent wipe method, and contamination removal. View Surfac...

Awlgrip Application Guide › Surface Preparation › Fiberglass Fiberglass Surface Preparation for Awlgrip Paint Before applying Awlgrip primer or topcoat systems, fiberglass and gelcoat surfaces must be properly cleaned, sanded, and prepared. Mold release agents, wax contamination, and oxidation will prevent epoxy primers from bonding correctly. Need help with a project? Call our coatings team: 321-639-3046 Quick Answer: How Do You Prep Fiberglass for Awlgrip?...

Awlgrip Application Guide › Surface Preparation › Previously Painted Surfaces Preparing Previously Painted Surfaces for Awlgrip Many boat refinishing projects involve applying new Awlgrip coatings over existing paint. Proper inspection, cleaning, and sanding determines whether the existing system can be recoated or must be removed. Need help with a project? Call our coatings team: 321-639-3046 Quick Answ...

Awlgrip Application Guide › Surface Preparation › Aluminum Aluminum Surface Preparation for Awlgrip Aluminum substrates require specific cleaning, profiling, and corrosion-protection priming to achieve a yacht-grade Awlgrip finish. Per the official Awlgrip YPAC training, prepped aluminum must be primed within 8 hours to prevent oxide regrowth. Need help with a project? Call our coatings team: 321-639-3046 ...

      Fiberglass Florida · Awlgrip Technical Hub High Build Epoxy Primer Awlgrip Application Guide · D8002 / D3002 The definitive Florida resource for Awlgrip High Build Epoxy Primer — spec data, spray settings, coverage calculations, and pro tips for our heat and humidity. Two-Component Epoxy High Build Surfacer Above Waterline Only Fiberglass & Wood Florida Climate   Explore Specs Coverage Calc Mixing Spray Se...

  FF · AWLGRIP GUIDE ⌕   EDITION 22 Fiberglass Florida · Florida's Awlgrip Technical Hub Awlgrip Application Guide The complete professional reference for Awlgrip coatings — surface preparation, spray gun setup, primers, topcoats, defect diagnosis, and repair. Adapted for Florida's climate by Fiberglass Florida. Surface Prep Spray Gun Settings Primers Topcoats Paint Defects Maintenance & Repair Florida Climate ...