Search results for: 'mist ga'

Open Molding & Lamination Technical Support Open molding and hand lay-up remain some of the most widely used fiberglass manufacturing methods in marine, industrial, and composite fabrication. Successful lamination depends on selecting the correct laminating resin and understanding how resin formulation, processing behavior, and cure characteristics affect the finished composite part. What Are Laminating Resins? Laminating resins are polyes...

Polyester vs Vinyl Ester Resin: Understanding the Differences Choosing the correct resin is one of the most important decisions in fiberglass lamination. Polyester and vinyl ester resins are both widely used in open molding, hand lay-up, and spray-up applications, but they offer different performance, durability, and cost characteristics. Understanding how these resin systems differ will help you select the right material for your project, environment, and performance requirements. ...

Awlgrip Yacht Paint Application Guide Complete professional guide to surface preparation, priming, fairing, and applying Awlgrip marine coatings. Built for boat builders, professional painters, and first-time users who want a flawless finish. Guide Contents Overview of Awlgrip Coating Systems Surface Preparation Fundamentals Preparing Fiberglass & Gelcoat Preparing Aluminum Preparing Steel Preparing Wood Fairing Compounds & Surface Correction...

MEKP Catalyst Calculator & Mixing Guide (oz, mL, cc) MEKP Catalyst (Methyl Ethyl Ketone Peroxide) is used to cure polyester resin, vinyl ester resin, and gelcoat. The correct mix ratio is critical to ensure proper curing, strength, and finish quality. Standard mix: 1.5% MEKP (about 2 oz per gallon of resin). Important Mixing Notes This information is based on MEKP 925 and tested at 77°F (25°C) . These are estimates and may vary depending on the resin system, shop conditions, and ap...