Search results for: 'sticky'

        Authorized Awlgrip Distributor Serving All of Florida  |  Call for Professional & Contractor Pricing FiberglassFlorida Awlgrip Fiberglass Gelcoat Epoxy   Guides Get a Quote Authorized Distributor — Florida Awlgrip Topcoat Systems Professional yacht finishing procedures, surface preparation standards, and complete Awlgrip system application guidance — from an aut...

MEKP Catalyst Calculator & Mixing Guide (oz, mL, cc) MEKP Catalyst (Methyl Ethyl Ketone Peroxide) is used to cure polyester resin, vinyl ester resin, and gelcoat. The correct mix ratio is critical to ensure proper curing, strength, and finish quality. Standard mix: 1.5% MEKP (about 2 oz per gallon of resin). Important Mixing Notes This information is based on MEKP 925 and tested at 77°F (25°C) . These are estimates and may vary depending on the resin system, shop conditions, and ap...

What Sandpaper Grit Do I Use? Not sure what sandpaper grit to use? This guide explains the best grit ranges for fiberglass repair, gelcoat, primer, marine paint, fairing compound, wet sanding, polishing, and general surface preparation. At Fiberglass Florida , we help boatyards, fiberglass repair shops, marine painters, surfboard builders, composite fabricators, and DIY boat owners choose the correct abrasive for the job. The right sandpaper grit can save time, improve adhesion, reduce deep scratc...