Search results for: 'test coat'

Awlcraft 3000 Technical Support Guide Awlcraft 3000 is a professional-grade, two-component polyurethane marine topcoat designed for high-gloss yacht finishes. This guide covers mixing ratios, spray setup, film thickness, drying times, repairs, maintenance, and common contractor questions. If you are spraying Awlcraft 3000 and need technical clarity, this is your complete support resource. What Is Awlcraft 3000? Short Answer: Awlcraft 3000 is a buffable, repairable, high-gloss p...

Awlgrip Yacht Paint Application Guide Complete professional guide to surface preparation, priming, fairing, and applying Awlgrip marine coatings. Built for boat builders, professional painters, and first-time users who want a flawless finish. Guide Contents Overview of Awlgrip Coating Systems Surface Preparation Fundamentals Preparing Fiberglass & Gelcoat Preparing Aluminum Preparing Steel Preparing Wood Fairing Compounds & Surface Correction...

Steel Surface Preparation Guide Correct surface preparation of steel is critical for long-term coating performance. Removing mill scale, rust, shop primers and contaminants ensures strong adhesion and corrosion protection when applying Awlgrip coating systems. Select Your Steel Surface Scenario Steel (No Fairing Required) Standard steel surfaces where fairing compounds are not required. View System Steel (Fairing Required) ...

MEKP Catalyst Calculator & Mixing Guide (oz, mL, cc) MEKP Catalyst (Methyl Ethyl Ketone Peroxide) is used to cure polyester resin, vinyl ester resin, and gelcoat. The correct mix ratio is critical to ensure proper curing, strength, and finish quality. Standard mix: 1.5% MEKP (about 2 oz per gallon of resin). Important Mixing Notes This information is based on MEKP 925 and tested at 77°F (25°C) . These are estimates and may vary depending on the resin system, shop conditions, and ap...