Search results for: 'tool pot'

Mold Building & Tooling Technical Support Building a high-quality fiberglass mold requires more than just materials — it requires proper surface preparation, correct tooling products, and disciplined process control. Fiberglass Florida provides hands-on technical guidance for professional mold builders, boat repair yards, and composite manufacturers using proven composite tooling methods focused on surface quality, dimensional stability, and long-term mold performance...

      Fiberglass Florida · Awlgrip Technical Hub High Build Epoxy Primer Awlgrip Application Guide · D8002 / D3002 The definitive Florida resource for Awlgrip High Build Epoxy Primer — spec data, spray settings, coverage calculations, and pro tips for our heat and humidity. Two-Component Epoxy High Build Surfacer Above Waterline Only Fiberglass & Wood Florida Climate   Explore Specs Coverage Calc Mixing Spray Se...

Fiberglass & Gelcoat Technical Support Fiberglass and gelcoat work demands the right materials, proper technique, and an understanding of how each layer in the system works together. Whether you’re making repairs, building a mold, or producing parts, Fiberglass Florida provides technical guidance built on real-world experience. Our team supports professionals and serious DIY builders working with polyester, vinyl ester, and epoxy systems. We help you select compatible products, apply them corre...

Awlgrip Yacht Paint Application Guide Complete professional guide to surface preparation, priming, fairing, and applying Awlgrip marine coatings. Built for boat builders, professional painters, and first-time users who want a flawless finish. Guide Contents Overview of Awlgrip Coating Systems Surface Preparation Fundamentals Preparing Fiberglass & Gelcoat Preparing Aluminum Preparing Steel Preparing Wood Fairing Compounds & Surface Correction...

MEKP Catalyst Calculator & Mixing Guide (oz, mL, cc) MEKP Catalyst (Methyl Ethyl Ketone Peroxide) is used to cure polyester resin, vinyl ester resin, and gelcoat. The correct mix ratio is critical to ensure proper curing, strength, and finish quality. Standard mix: 1.5% MEKP (about 2 oz per gallon of resin). Important Mixing Notes This information is based on MEKP 925 and tested at 77°F (25°C) . These are estimates and may vary depending on the resin system, shop conditions, and ap...