Search results for: 'dust rel'

Fiberglass & Gelcoat Technical Support Fiberglass and gelcoat work demands the right materials, proper technique, and an understanding of how each layer in the system works together. Whether you’re making repairs, building a mold, or producing parts, Fiberglass Florida provides technical guidance built on real-world experience. Our team supports professionals and serious DIY builders working with polyester, vinyl ester, and epoxy systems. We help you select compatible products, apply them corre...

Open Molding & Lamination Technical Support Open molding and hand lay-up remain some of the most widely used fiberglass manufacturing methods in marine, industrial, and composite fabrication. Successful lamination depends on selecting the correct laminating resin and understanding how resin formulation, processing behavior, and cure characteristics affect the finished composite part. What Are Laminating Resins? Laminating resins are polyes...

Awlgrip Surface Preparation Guide Proper surface preparation is the most important step in any Awlgrip paint system. Different substrates require specific cleaning procedures, sanding profiles, and primer systems to achieve proper adhesion and long-term durability. Shop Awlgrip Full Application Guide Surface Prep → Fairing → Primer → Topcoat → Cure → Finish ...

Awlgrip Application Guide › Surface Preparation › Fiberglass Fiberglass Surface Preparation for Awlgrip Paint Before applying Awlgrip primer or topcoat systems, fiberglass and gelcoat surfaces must be properly cleaned, sanded, and prepared. Mold release agents, wax contamination, and oxidation will prevent epoxy primers from bonding correctly. Need help with a project? Call our coatings team: 321-639-3046 Quick Answer: How Do You Prep Fiberglass for Awlgrip?...

Awlgrip Application Guide › Surface Preparation › Previously Painted Surfaces Preparing Previously Painted Surfaces for Awlgrip Many boat refinishing projects involve applying new Awlgrip coatings over existing paint. Proper inspection, cleaning, and sanding determines whether the existing system can be recoated or must be removed. Need help with a project? Call our coatings team: 321-639-3046 Quick Answ...

Awlgrip Application Guide › Surface Preparation › Aluminum Aluminum Surface Preparation for Awlgrip Aluminum substrates require specific cleaning, profiling, and corrosion-protection priming to achieve a yacht-grade Awlgrip finish. Per the official Awlgrip YPAC training, prepped aluminum must be primed within 8 hours to prevent oxide regrowth. Need help with a project? Call our coatings team: 321-639-3046 ...

  FF · AWLGRIP GUIDE ⌕   EDITION 22 Fiberglass Florida · Florida's Awlgrip Technical Hub Awlgrip Application Guide The complete professional reference for Awlgrip coatings — surface preparation, spray gun setup, primers, topcoats, defect diagnosis, and repair. Adapted for Florida's climate by Fiberglass Florida. Surface Prep Spray Gun Settings Primers Topcoats Paint Defects Maintenance & Repair Florida Climate ...