Search results for: '1.5 ro'

Mold Building & Tooling Technical Support Building a high-quality fiberglass mold requires more than just materials — it requires proper surface preparation, correct tooling products, and disciplined process control. Fiberglass Florida provides hands-on technical guidance for professional mold builders, boat repair yards, and composite manufacturers using proven composite tooling methods focused on surface quality, dimensional stability, and long-term mold performance...

Awlgrip Yacht Paint Application Guide Complete professional guide to surface preparation, priming, fairing, and applying Awlgrip marine coatings. Built for boat builders, professional painters, and first-time users who want a flawless finish. Guide Contents Overview of Awlgrip Coating Systems Surface Preparation Fundamentals Preparing Fiberglass & Gelcoat Preparing Aluminum Preparing Steel Preparing Wood Fairing Compounds & Surface Correction...

Awlgrip Application Guide › Surface Preparation › Fiberglass Fiberglass Surface Preparation for Awlgrip Paint Before applying Awlgrip primer or topcoat systems, fiberglass and gelcoat surfaces must be properly cleaned, sanded, and prepared. Mold release agents, wax contamination, and oxidation will prevent epoxy primers from bonding correctly. Need help with a project? Call our coatings team: 321-639-3046 Quick Answer: How Do You Prep Fiberglass for Awlgrip?...

Awlgrip Application Guide › Surface Preparation › Aluminum Aluminum Surface Preparation for Awlgrip Aluminum substrates require specific cleaning, profiling, and corrosion-protection priming to achieve a yacht-grade Awlgrip finish. Per the official Awlgrip YPAC training, prepped aluminum must be primed within 8 hours to prevent oxide regrowth. Need help with a project? Call our coatings team: 321-639-3046 ...

Hullgard Extra Epoxy Primer Application Guide How and Why to Use Hullgard Extra Hullgard Extra Epoxy Primer is a high-build, anticorrosive substrate primer designed to create a stable foundation for fairing compounds and finishing systems. It is commonly used after corrosion primers like Max Cor CF to build film thickness, improve adhesion, and prepare surfaces for Awlfair and topcoat systems. This primer is ideal for aluminum, steel, and fiberglass substrates where long-term durab...

MEKP Catalyst Calculator & Mixing Guide (oz, mL, cc) MEKP Catalyst (Methyl Ethyl Ketone Peroxide) is used to cure polyester resin, vinyl ester resin, and gelcoat. The correct mix ratio is critical to ensure proper curing, strength, and finish quality. Standard mix: 1.5% MEKP (about 2 oz per gallon of resin). Important Mixing Notes This information is based on MEKP 925 and tested at 77°F (25°C) . These are estimates and may vary depending on the resin system, shop conditions, and ap...

  FF · AWLGRIP GUIDE ⌕   EDITION 22 Fiberglass Florida · Florida's Awlgrip Technical Hub Awlgrip Application Guide The complete professional reference for Awlgrip coatings — surface preparation, spray gun setup, primers, topcoats, defect diagnosis, and repair. Adapted for Florida's climate by Fiberglass Florida. Surface Prep Spray Gun Settings Primers Topcoats Paint Defects Maintenance & Repair Florida Climate ...