Search results for: 'full mold'

Fiberglass Florida Site Map Awlgrip Paint Gelcoats Epoxy Resins Polyester Resins Fiberglass Cloth Pour Foam Mold Making Resin Pigments Tools & Accessories Contact Us About Us

Hand Laminating & Spray-Up Technical Support Hand laminating and spray-up are two of the most common open molding processes used in fiberglass fabrication. While both methods rely on similar materials, success depends on understanding the differences in application technique, resin behavior, and process control. At Fiberglass Florida, we provide technical support to help fabricators, repair yards, and builders choose the right laminating method and materials for their project — a...

Gelcoat: What It Is, How It’s Used, and How to Repair It Gelcoat is the outermost protective and cosmetic layer used on fiberglass parts. Understanding how gelcoat works — and how to apply or repair it correctly — is critical to achieving long-lasting performance and professional results. What Is Gelcoat? Gelcoat is a pigmented polyester or vinyl ester resin applied to the surface of fiberglass parts. It creates a smooth, high-gloss finish while protecting the underlying laminate from wat...

Vacuum Infusion Technical Support Vacuum infusion is a closed-mold composite manufacturing process used to produce high-quality fiberglass laminates with precise resin control, improved fiber ratios, and reduced emissions. When set up correctly, infusion delivers consistent, strong, and lightweight parts with excellent surface quality. At Fiberglass Florida, we provide technical support for vacuum infusion projects ranging from small custom parts to large marine and industrial structure...

Preparing Gelcoat for Awlgrip Paint Systems When applying Awlgrip or Awlcraft coatings over fiberglass boats, proper preparation of existing or new gelcoat is critical for long-term adhesion and finish quality. Most adhesion failures in marine paint systems occur because of poor surface preparation rather than product failure. Why Gelcoat Preparation Matters Before applying Awlgrip systems the gelcoat surface must be: Free of wax and contamination Properly sanded to ...

Awlgrip Yacht Paint Application & Technical Guide Professional yacht finishing procedures, surface preparation standards, and Awlgrip system application guidance. Surface Prep → Fairing → Primer → Topcoat → Cure → Finish Surface Preparation Cleaning procedures, sanding standards, two-cloth solvent wipe method, and contamination removal. View Surfac...

Awlgrip Surface Preparation Guide Proper surface preparation is the most important step in any Awlgrip paint system. Different substrates require specific cleaning procedures, sanding profiles, and primer systems to achieve proper adhesion and long-term durability. Shop Awlgrip Full Application Guide Surface Prep → Fairing → Primer → Topcoat → Cure → Finish ...

Awlgrip Application Guide › Surface Preparation › Fiberglass Fiberglass Surface Preparation for Awlgrip Paint Before applying Awlgrip primer or topcoat systems, fiberglass and gelcoat surfaces must be properly cleaned, sanded, and prepared. Mold release agents, wax contamination, and oxidation will prevent epoxy primers from bonding correctly. Need help with a project? Call our coatings team: 321-639-3046 Quick Answer: How Do You Prep Fiberglass for Awlgrip?...

Polyester Resin Guide: How to Use It, Types, and What You Need Short Answer Polyester resin is the most widely used material for fiberglass repair, boat building, and composite construction. It is affordable, fast-curing, and ideal for laminating fiberglass cloth, mat, and structural parts. --- What is Polyester Resin? Polyester resin is a thermosetting resin used in fiberglass applications to create strong, durable composite structures. It is activated using MEKP catalyst and cures throug...