Search results for: 'mold 3'

Mold Building & Tooling Technical Support Building a high-quality fiberglass mold requires more than just materials — it requires proper surface preparation, correct tooling products, and disciplined process control. Fiberglass Florida provides hands-on technical guidance for professional mold builders, boat repair yards, and composite manufacturers using proven composite tooling methods focused on surface quality, dimensional stability, and long-term mold performance...

Open Molding & Lamination Technical Support Open molding and hand lay-up remain some of the most widely used fiberglass manufacturing methods in marine, industrial, and composite fabrication. Successful lamination depends on selecting the correct laminating resin and understanding how resin formulation, processing behavior, and cure characteristics affect the finished composite part. What Are Laminating Resins? Laminating resins are polyes...

Technical Support & Expert Guidance Working with fiberglass, gelcoat, and marine coatings requires the right materials, correct procedures, and real-world experience. At Fiberglass Florida, technical support is part of what we do every day. Our team works directly with boat builders, repair yards, manufacturers, and serious DIY builders to solve real-world problems using proven materials and practical methods. Call Technical Support Send Us a Message ...

Polyester vs Vinyl Ester Resin: Understanding the Differences Choosing the correct resin is one of the most important decisions in fiberglass lamination. Polyester and vinyl ester resins are both widely used in open molding, hand lay-up, and spray-up applications, but they offer different performance, durability, and cost characteristics. Understanding how these resin systems differ will help you select the right material for your project, environment, and performance requirements. ...

Preparing Gelcoat for Awlgrip Paint Systems When applying Awlgrip or Awlcraft coatings over fiberglass boats, proper preparation of existing or new gelcoat is critical for long-term adhesion and finish quality. Most adhesion failures in marine paint systems occur because of poor surface preparation rather than product failure. Why Gelcoat Preparation Matters Before applying Awlgrip systems the gelcoat surface must be: Free of wax and contamination Properly sanded to ...

Fiberglass Surface Preparation for Awlgrip Paint Before applying Awlgrip mer or topcoat systems, fiberglass surfaces must be properly cleaned, sanded, and prepared. Contamination such as wax, mold release agents, oil, or oxidation will prevent pricoatings from bonding correctly. Need help with a project? Call our coatings team: 321-639-3046 Quick Answer: How Do You Prep Fiberglass for Awlgrip? Clean the surface to remove wax, oil, grease, and contamination Use t...