Search results for: 'helps by'

Fiberglass & Gelcoat Technical Support Fiberglass and gelcoat work demands the right materials, proper technique, and an understanding of how each layer in the system works together. Whether you’re making repairs, building a mold, or producing parts, Fiberglass Florida provides technical guidance built on real-world experience. Our team supports professionals and serious DIY builders working with polyester, vinyl ester, and epoxy systems. We help you select compatible products, apply them corre...

FAQ Section We’ve compiled answers to the most common questions we receive about resins, fiberglass, gelcoat, surfboard building, and marine repair. If you don’t see what you’re looking for, head over to our Technical Support page for step-by-step guides and deeper technical resources. Help Center   ...

Boat Restoration Technical Support Guide Last updated: February 2026 Boat restoration is the process of repairing, rebuilding, and refinishing fiberglass boats to restore structural integrity, appearance, and long-term performance. This technical support guide serves as a master reference for understanding materials, repair methods, and best practices used in modern fiberglass boat restoration. This page is designed as a living knowledge base. Each section below will continue ...

Fiberglass Surface Preparation for Awlgrip Paint Before applying Awlgrip mer or topcoat systems, fiberglass surfaces must be properly cleaned, sanded, and prepared. Contamination such as wax, mold release agents, oil, or oxidation will prevent pricoatings from bonding correctly. Need help with a project? Call our coatings team: 321-639-3046 Quick Answer: How Do You Prep Fiberglass for Awlgrip? Clean the surface to remove wax, oil, grease, and contamination Use t...

Please replace this text with you Privacy Policy. Please add any additional cookies your website uses below (e.g. Google Analytics). This privacy policy sets out how this website (hereafter "the Store") uses and protects any information that you give the Store while using this website. The Store is committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be i...

  This privacy policy sets out how Fiberglass Florida uses and protects any information that you give Fiberglass Florida when you use this website. Fiberglass Florida is committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement. Fiberglass Florida may change this policy from time to time by updating this page...

Customer Service Method of Payment Freight Terms Ordering Returns What to do if your package arrives damaged Special Orders Returned Checks Limitation of Liability Warranties Sales Tax Method of Payment We accept Visa, MasterCard or PayPal. You can also mail us a check. Please do not send cash. Freight Terms All orders are shipped prepaid and freight added or LTL COD. Customer may supply their U...

Professional Awlgrip Guidance — Explained Clearly Awlgrip coatings are professional-grade marine finishes. When applied correctly, they deliver unmatched durability and appearance — but they are also process-sensitive. Our technical guidance follows the same application principles outlined in Awlgrip’s official application documentation, translated into clear, real-world advice for boat owners, repair shops, and first-time painters. Common Awlgrip Application Issues We Hel...

Mold Building & Tooling Technical Support Building a high-quality fiberglass mold requires more than just materials — it requires proper surface preparation, correct tooling products, and disciplined process control. Fiberglass Florida provides hands-on technical guidance for professional mold builders, boat repair yards, and composite manufacturers using proven composite tooling methods focused on surface quality, dimensional stability, and long-term mold performance...

Hand Laminating & Spray-Up Technical Support Hand laminating and spray-up are two of the most common open molding processes used in fiberglass fabrication. While both methods rely on similar materials, success depends on understanding the differences in application technique, resin behavior, and process control. At Fiberglass Florida, we provide technical support to help fabricators, repair yards, and builders choose the right laminating method and materials for their project — a...

Polyester vs Vinyl Ester Resin: Understanding the Differences Choosing the correct resin is one of the most important decisions in fiberglass lamination. Polyester and vinyl ester resins are both widely used in open molding, hand lay-up, and spray-up applications, but they offer different performance, durability, and cost characteristics. Understanding how these resin systems differ will help you select the right material for your project, environment, and performance requirements. ...

Vacuum Infusion Technical Support Vacuum infusion is a closed-mold composite manufacturing process used to produce high-quality fiberglass laminates with precise resin control, improved fiber ratios, and reduced emissions. When set up correctly, infusion delivers consistent, strong, and lightweight parts with excellent surface quality. At Fiberglass Florida, we provide technical support for vacuum infusion projects ranging from small custom parts to large marine and industrial structure...

Preparing Gelcoat for Awlgrip Paint Systems When applying Awlgrip or Awlcraft coatings over fiberglass boats, proper preparation of existing or new gelcoat is critical for long-term adhesion and finish quality. Most adhesion failures in marine paint systems occur because of poor surface preparation rather than product failure. Why Gelcoat Preparation Matters Before applying Awlgrip systems the gelcoat surface must be: Free of wax and contamination Properly sanded to ...

Awlcraft 3000 Technical Support Guide Awlcraft 3000 is a professional-grade, two-component polyurethane marine topcoat designed for high-gloss yacht finishes. This guide covers mixing ratios, spray setup, film thickness, drying times, repairs, maintenance, and common contractor questions. If you are spraying Awlcraft 3000 and need technical clarity, this is your complete support resource. What Is Awlcraft 3000? Short Answer: Awlcraft 3000 is a buffable, repairable, high-gloss p...

Awlgrip & Marine Paint Technical Support Awlgrip systems are precision coatings where surface preparation, product selection, and application technique all matter. We help painters and boat owners achieve consistent, professional results. This section focuses on system compatibility, proper sequencing, and real-world application guidance for Awlgrip, Awlcraft, primers, converters, reducers, and maintenance products. Understanding the Awlgrip System Awlgrip is not just paint — it i...

Awlgrip Yacht Paint Application Guide Complete professional guide to surface preparation, priming, fairing, and applying Awlgrip marine coatings. Built for boat builders, professional painters, and first-time users who want a flawless finish. Guide Contents Overview of Awlgrip Coating Systems Surface Preparation Fundamentals Preparing Fiberglass & Gelcoat Preparing Aluminum Preparing Steel Preparing Wood Fairing Compounds & Surface Correction...