Search results for: 'mold'

Mold Building & Tooling Technical Support Building a high-quality fiberglass mold requires more than just materials — it requires proper surface preparation, correct tooling products, and disciplined process control. Fiberglass Florida provides hands-on technical guidance for professional mold builders, boat repair yards, and composite manufacturers using proven composite tooling methods focused on surface quality, dimensional stability, and long-term mold performance...

Open Molding & Lamination Technical Support Open molding and hand lay-up remain some of the most widely used fiberglass manufacturing methods in marine, industrial, and composite fabrication. Successful lamination depends on selecting the correct laminating resin and understanding how resin formulation, processing behavior, and cure characteristics affect the finished composite part. What Are Laminating Resins? Laminating resins are polyes...

Hand Laminating & Spray-Up Technical Support Hand laminating and spray-up are two of the most common open molding processes used in fiberglass fabrication. While both methods rely on similar materials, success depends on understanding the differences in application technique, resin behavior, and process control. At Fiberglass Florida, we provide technical support to help fabricators, repair yards, and builders choose the right laminating method and materials for their project — a...

Fiberglass Florida Site Map Awlgrip Paint Gelcoats Epoxy Resins Polyester Resins Fiberglass Cloth Pour Foam Mold Making Resin Pigments Tools & Accessories Contact Us About Us

Gelcoat: What It Is, How It’s Used, and How to Repair It Gelcoat is the outermost protective and cosmetic layer used on fiberglass parts. Understanding how gelcoat works — and how to apply or repair it correctly — is critical to achieving long-lasting performance and professional results. What Is Gelcoat? Gelcoat is a pigmented polyester or vinyl ester resin applied to the surface of fiberglass parts. It creates a smooth, high-gloss finish while protecting the underlying laminate from wat...

Fiberglass & Gelcoat Technical Support Fiberglass and gelcoat work demands the right materials, proper technique, and an understanding of how each layer in the system works together. Whether you’re making repairs, building a mold, or producing parts, Fiberglass Florida provides technical guidance built on real-world experience. Our team supports professionals and serious DIY builders working with polyester, vinyl ester, and epoxy systems. We help you select compatible products, apply them corre...

Technical Support & Expert Guidance Working with fiberglass, gelcoat, and marine coatings requires the right materials, correct procedures, and real-world experience. At Fiberglass Florida, technical support is part of what we do every day. Our team works directly with boat builders, repair yards, manufacturers, and serious DIY builders to solve real-world problems using proven materials and practical methods. Call Technical Support Send Us a Message ...

Polyester vs Vinyl Ester Resin: Understanding the Differences Choosing the correct resin is one of the most important decisions in fiberglass lamination. Polyester and vinyl ester resins are both widely used in open molding, hand lay-up, and spray-up applications, but they offer different performance, durability, and cost characteristics. Understanding how these resin systems differ will help you select the right material for your project, environment, and performance requirements. ...

Vacuum Infusion Technical Support Vacuum infusion is a closed-mold composite manufacturing process used to produce high-quality fiberglass laminates with precise resin control, improved fiber ratios, and reduced emissions. When set up correctly, infusion delivers consistent, strong, and lightweight parts with excellent surface quality. At Fiberglass Florida, we provide technical support for vacuum infusion projects ranging from small custom parts to large marine and industrial structure...

Preparing Gelcoat for Awlgrip Paint Systems When applying Awlgrip or Awlcraft coatings over fiberglass boats, proper preparation of existing or new gelcoat is critical for long-term adhesion and finish quality. Most adhesion failures in marine paint systems occur because of poor surface preparation rather than product failure. Why Gelcoat Preparation Matters Before applying Awlgrip systems the gelcoat surface must be: Free of wax and contamination Properly sanded to ...

Awlgrip Surface Preparation Guide Proper surface preparation is the most important step in any Awlgrip paint system. Different substrates require specific cleaning procedures, sanding profiles, and primer systems to achieve proper adhesion and long-t erm durability. Shop Awlgrip Full Application Guide Surface Prep → Primer → Fairing → Primer → Topcoat → Cure Fiberglass Surface Preparation Fiberglass substrates require thorough cleaning and sa...

Fiberglass Surface Preparation for Awlgrip Paint Before applying Awlgrip mer or topcoat systems, fiberglass surfaces must be properly cleaned, sanded, and prepared. Contamination such as wax, mold release agents, oil, or oxidation will prevent pricoatings from bonding correctly. Need help with a project? Call our coatings team: 321-639-3046 Quick Answer: How Do You Prep Fiberglass for Awlgrip? Clean the surface to remove wax, oil, grease, and contamination Use t...

Polyester Resin Guide: How to Use It, Types, and What You Need Short Answer Polyester resin is the most widely used material for fiberglass repair, boat building, and composite construction. It is affordable, fast-curing, and ideal for laminating fiberglass cloth, mat, and structural parts. --- What is Polyester Resin? Polyester resin is a thermosetting resin used in fiberglass applications to create strong, durable composite structures. It is activated using MEKP catalyst and cures throug...