Acralock SA10-60 – Structural Methacrylate Adhesive

Acralock SA10-60 is a professional-grade two-component methacrylate adhesive designed for structural bonding of metals, composites, and plastics. Engineered for marine, automotive, and industrial applications, it delivers outstanding strength, toughness, and flexibility under vibration, stress, and temperature change.

Key Benefits

• High-strength 10:1 mix ratio for reliable bonding.
• Excellent gap-filling ability and vibration resistance.
• Long 60-minute working time for complex assemblies.
• Adheres to aluminum, steel, fiberglass, carbon fiber, and plastics.
• Resistant to moisture, saltwater, and thermal cycling.

Common Applications

• Boat and marine construction
• Metal-to-composite bonding
• Fiberglass and carbon fiber repair
• Automotive and aerospace fabrication

Technical Information

• Mix Ratio: 10:1 (by volume)
• Working Time: ~60 minutes
• Fixture Time: ~120 minutes
• Tensile Strength: ≈ 2,500 psi (17 MPa)
• Elongation: 80 – 120 %
• Temperature Range: –55 °C to 120 °C

Use with Acralock applicator gun and static mixer tips for best performance. Clean and abrade bonding surfaces for optimal adhesion.

Need help choosing the right adhesive? Call 321-639-3046 or email orders@fiberglassflorida.com.

Best practice: clean surfaces, degrease, lightly abrade where applicable, and consider using Acralock’s AP-1 cleaner for optimal adhesion on metals. :contentReference[oaicite:12]{index=12}

Warning & Handling:
Always consult the product SDS and TDS before use. Work in well-ventilated areas. Wear standard PPE (gloves, eye protection). Do not mix by hand unless appropriate. Large volumes or thick bead applications may generate heat during cure—plan accordingly. :contentReference[oaicite:13]{index=13}