• My Account
  • My Wish List ()
  • Sign In
  • Compare
  • Create an Account
Toggle Nav
Search
Menu
Account
main product photo

AwlGrip Polyurethane Topcoat (Gallons)

Be the first to review this product
In stock
SKU
19-AG-ColorGal
As low as $190.01
Ship to USCalculate Shipping Cost
Add to Compare
Quick Overview
AWLGRIP POLYURETHANE TOPCOATS BASE - PART "A" ONLY A two component, polyester based, light-fast, linear aliphatic polyurethane coating with long lasting gloss and color retention, and outstanding chemical resistance. Do no use below the waterline. A low maintenance coating. Do not wax, buff, compound, or polish. Product is sold by the quart or gallon. SPRAY: Mix by volume one part AWLGRIP Topcoat Base Component with one part AWL-CAT #2/G-3010 Spray Converter to a smooth, homogenous mixture. Reduce up to 25% with T0001, T0002, T0003 depending on conditions. Overall mix is 1:1:1/2 by volume. BRUSH/ROLLER: Mix by volume two parts AWLGRIP Topcoat Base Component with one part AWL-CAT #3/H-3002 Brushing Converter until one smooth, homogenous mixture is obtained. Reduce 25% to 33% with T0031. Overall mix is 2:1:3/4-1 by volume.

Order With Confidence

 

Related Products
AWLGRIP POLYURETHANE TOPCOATS BASE - PART "A" ONLY A two component, polyester based, light-fast, linear aliphatic polyurethane coating with long lasting gloss and color retention, and outstanding chemical resistance. Do no use below the waterline. A low maintenance coating. Do not wax, buff, compound, or polish. Product is sold by the quart or gallon. SPRAY: Mix by volume one part AWLGRIP Topcoat Base Component with one part AWL-CAT #2/G-3010 Spray Converter to a smooth, homogenous mixture. Reduce up to 25% with T0001, T0002, T0003 depending on conditions. Overall mix is 1:1:1/2 by volume. BRUSH/ROLLER: Mix by volume two parts AWLGRIP Topcoat Base Component with one part AWL-CAT #3/H-3002 Brushing Converter until one smooth, homogenous mixture is obtained. Reduce 25% to 33% with T0031. Overall mix is 2:1:3/4-1 by volume.
More Information
UnitEach
ManufacturerAWLGRIP
0
Rating:
0% of 100
0 Reviews
Write Your Own Review
You're reviewing:AwlGrip Polyurethane Topcoat (Gallons)
Your Rating
Customer Questions
What are the mix ratios for Awlgrip rolling and tipping?
Brush/Roller: Mix by volume two parts Awlgrip Topcoat Base Component with one part Awlcat #3/H3002 Brushing Converter until one smooth, homogenous mixture is obtained. Reduce 10-33% with T0031. Overall mix is 2:1:⅓-1 by volume (8 oz. Base, 4 oz. H3002...
Read More
What is the mix ratio for spraying Awlgrip?
Mix by volume one part Awlgrip Topcoat base component with one part Awlcat #2 (G3010) spray converter to a smooth, homogenous mixture. Reducer addition level required to achieve 11-14 seconds viscosity DIN4 or equivalent (16-18 seconds viscosity Zahn...
Read More
Which Awlgrip colors can Fiberglass Florida make?
We are set up to make any of the awlgrip, awlcraft 2000, and awlcraft se colors. We do stock some premade colors as well. Just call us and we can make what you need! Both locations have the ability to make colors. 
Read More
Gelcoat vs. Awlgrip: A Comprehensive Comparison for Marine Finishes
Purpose: Gelcoat: Primarily used as a factory finish for fiberglass boats and as a repair material for fiberglass surfaces. Awlgrip Paint: Used as a topcoat for both new and older boats...
Read More
What grit should I sand for Awlgrip 545 and before the topcoat
Long answer Before primer (545): Block and finish sand to 180 grit so the primer has consistent tooth and builds smoothly. After 545 primer: Once cured per the TDS, sand the primed surface to
Read More
What is Awlgrip Fairing Compound used for?
Long answer: Awlgrip fairing compounds are lightweight epoxy fillers designed to fair hulls, decks, and composite parts. They are applied after laminating and before priming to correct surface irregularities. Once cured and sanded, the...
Read More
Please, mind that only logged in users can submit questions

Downloads

Default Category

We found other products you might like!