Search results for: 'Ratio har'

Awlcraft 3000 Technical Support Guide Awlcraft 3000 is a professional-grade, two-component polyurethane marine topcoat designed for high-gloss yacht finishes. This guide covers mixing ratios, spray setup, film thickness, drying times, repairs, maintenance, and common contractor questions. If you are spraying Awlcraft 3000 and need technical clarity, this is your complete support resource. What Is Awlcraft 3000? Short Answer: Awlcraft 3000 is a buffable, repairable, high-gloss p...

Awlgrip & Marine Paint Technical Support Awlgrip systems are precision coatings where surface preparation, product selection, and application technique all matter. We help painters and boat owners achieve consistent, professional results. This section focuses on system compatibility, proper sequencing, and real-world application guidance for Awlgrip, Awlcraft, primers, converters, reducers, and maintenance products. Understanding the Awlgrip System Awlgrip is not just paint — it i...

Please replace this text with you Privacy Policy. Please add any additional cookies your website uses below (e.g. Google Analytics). This privacy policy sets out how this website (hereafter "the Store") uses and protects any information that you give the Store while using this website. The Store is committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be i...

  This privacy policy sets out how Fiberglass Florida uses and protects any information that you give Fiberglass Florida when you use this website. Fiberglass Florida is committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement. Fiberglass Florida may change this policy from time to time by updating this page...

TERMS OF SERVICE ---- OVERVIEW This website is operated by Fiberglass Florida. Throughout the site, the terms “we”, “us” and “our” refer to Fiberglass Florida. Fiberglass Florida offers this website, including all information, tools and services available from this site to you, the user, conditioned upon your acceptance of all terms, conditions, policies and notices stated here. By visiting our site and/ or purchasing something from us, you engage in our “Service” and agree to be ...

Gelcoat: What It Is, How It’s Used, and How to Repair It Gelcoat is the outermost protective and cosmetic layer used on fiberglass parts. Understanding how gelcoat works — and how to apply or repair it correctly — is critical to achieving long-lasting performance and professional results. What Is Gelcoat? Gelcoat is a pigmented polyester or vinyl ester resin applied to the surface of fiberglass parts. It creates a smooth, high-gloss finish while protecting the underlying laminate from wat...

Fiberglass Florida: Awlcraft 3000 – The Next Generation of Yacht Topcoats Awlcraft 3000 is the newest evolution in the Awlgrip® family of marine coatings. Designed as a next-generation acrylic urethane topcoat , it offers a perfect balance of brilliant color, high-gloss retention, and easy repairability . Professional applicators worldwide trust it as the modern standard for yacht finishing. Why Awlcraft 3000 Is Different Next-Level Technology: Builds on decades of Awlgrip innovat...

Open Molding & Lamination Technical Support Open molding and hand lay-up remain some of the most widely used fiberglass manufacturing methods in marine, industrial, and composite fabrication. Successful lamination depends on selecting the correct laminating resin and understanding how resin formulation, processing behavior, and cure characteristics affect the finished composite part. What Are Laminating Resins? Laminating resins are polyes...

Hand Laminating & Spray-Up Technical Support Hand laminating and spray-up are two of the most common open molding processes used in fiberglass fabrication. While both methods rely on similar materials, success depends on understanding the differences in application technique, resin behavior, and process control. At Fiberglass Florida, we provide technical support to help fabricators, repair yards, and builders choose the right laminating method and materials for their project — a...

Boat Restoration Technical Support Guide Last updated: February 2026 Boat restoration is the process of repairing, rebuilding, and refinishing fiberglass boats to restore structural integrity, appearance, and long-term performance. This technical support guide serves as a master reference for understanding materials, repair methods, and best practices used in modern fiberglass boat restoration. This page is designed as a living knowledge base. Each section below will continue ...

Awlgrip Yacht Paint Application Guide Complete professional guide to surface preparation, priming, fairing, and applying Awlgrip marine coatings. Built for boat builders, professional painters, and first-time users who want a flawless finish. Guide Contents Overview of Awlgrip Coating Systems Surface Preparation Fundamentals Preparing Fiberglass & Gelcoat Preparing Aluminum Preparing Steel Preparing Wood Fairing Compounds & Surface Correction...

Steel Surface Preparation Guide Correct surface preparation of steel is critical for long-term coating performance. Removing mill scale, rust, shop primers and contaminants ensures strong adhesion and corrosion protection when applying Awlgrip coating systems. Select Your Steel Surface Scenario Steel (No Fairing Required) Standard steel surfaces where fairing compounds are not required. View System Steel (Fairing Required) ...

Max Cor CF Epoxy Primer (Controlled Fusion Technology) How and Why to Use Max Cor CF Max Cor CF Epoxy Primer is a high-performance, chromate-free corrosion primer engineered for aluminum and steel in marine and industrial environments. Designed with Controlled Fusion Technology, it chemically bonds to properly prepared metal surfaces to create a durable, corrosion-resistant foundation for subsequent coatings. This system is ideal for aluminum boats, towers, structural components, a...

Hullgard Extra Epoxy Primer Application Guide How and Why to Use Hullgard Extra Hullgard Extra Epoxy Primer is a high-build, anticorrosive substrate primer designed to create a stable foundation for fairing compounds and finishing systems. It is commonly used after corrosion primers like Max Cor CF to build film thickness, improve adhesion, and prepare surfaces for Awlfair and topcoat systems. This primer is ideal for aluminum, steel, and fiberglass substrates where long-term durab...

MEKP Catalyst Calculator & Mixing Guide (oz, mL, cc) MEKP Catalyst (Methyl Ethyl Ketone Peroxide) is used to cure polyester resin, vinyl ester resin, and gelcoat. The correct mix ratio is critical to ensure proper curing, strength, and finish quality. Standard mix: 1.5% MEKP (about 2 oz per gallon of resin). Important Mixing Notes This information is based on MEKP 925 and tested at 77°F (25°C) . These are estimates and may vary depending on the resin system, shop conditions, and ap...