Search results for: 'test and 2'

Open Molding & Lamination Technical Support Open molding and hand lay-up remain some of the most widely used fiberglass manufacturing methods in marine, industrial, and composite fabrication. Successful lamination depends on selecting the correct laminating resin and understanding how resin formulation, processing behavior, and cure characteristics affect the finished composite part. What Are Laminating Resins? Laminating resins are polyes...

Awlcraft 3000 Technical Support Guide Awlcraft 3000 is a professional-grade, two-component polyurethane marine topcoat designed for high-gloss yacht finishes. This guide covers mixing ratios, spray setup, film thickness, drying times, repairs, maintenance, and common contractor questions. If you are spraying Awlcraft 3000 and need technical clarity, this is your complete support resource. What Is Awlcraft 3000? Short Answer: Awlcraft 3000 is a buffable, repairable, high-gloss p...

Awlgrip Yacht Paint Application Guide Complete professional guide to surface preparation, priming, fairing, and applying Awlgrip marine coatings. Built for boat builders, professional painters, and first-time users who want a flawless finish. Guide Contents Overview of Awlgrip Coating Systems Surface Preparation Fundamentals Preparing Fiberglass & Gelcoat Preparing Aluminum Preparing Steel Preparing Wood Fairing Compounds & Surface Correction...

TERMS OF SERVICE ---- OVERVIEW This website is operated by Fiberglass Florida. Throughout the site, the terms “we”, “us” and “our” refer to Fiberglass Florida. Fiberglass Florida offers this website, including all information, tools and services available from this site to you, the user, conditioned upon your acceptance of all terms, conditions, policies and notices stated here. By visiting our site and/ or purchasing something from us, you engage in our “Service” and agree to be ...

Steel Surface Preparation Guide Correct surface preparation of steel is critical for long-term coating performance. Removing mill scale, rust, shop primers and contaminants ensures strong adhesion and corrosion protection when applying Awlgrip coating systems. Select Your Steel Surface Scenario Steel (No Fairing Required) Standard steel surfaces where fairing compounds are not required. View System Steel (Fairing Required) ...

MEKP Catalyst Calculator & Mixing Guide (oz, mL, cc) MEKP Catalyst (Methyl Ethyl Ketone Peroxide) is used to cure polyester resin, vinyl ester resin, and gelcoat. The correct mix ratio is critical to ensure proper curing, strength, and finish quality. Standard mix: 1.5% MEKP (about 2 oz per gallon of resin). Important Mixing Notes This information is based on MEKP 925 and tested at 77°F (25°C) . These are estimates and may vary depending on the resin system, shop conditions, and ap...