FAQ Search Results

Structural repairs restore strength, while cosmetic repairs focus on appearance and surface finish

Structural repairs use biaxial or woven fiberglass like 1708, while cosmetic repairs typically use chopped strand mat or lightweight cloth.

Chopped strand mat is commonly used with polyester and vinyl ester resins to build thickness and improve bonding.

Because each layer relies on a controlled secondary bond, and over-curing between layers can weaken adhesion and cause defects.

Isophthalic gel coats provide the best gloss, while vinyl ester gel coats offer higher strength and heat resistance.

Barrier coats reduce print-through, strengthen the gel coat, and improve mold surface cosmetics.

Reichhold Gloss Resin is used as a surfboard gloss coat resin to create a hard, tack-free, high-gloss finish over laminated polyester surfboards and fiberglass marine surfaces.

Awlcraft 3000 is a premium spray-applied polyurethane marine topcoat known for vibrant color depth, high gloss, and repairability.

Yes, Awlcraft 3000 is fully repairable and can be blended and buffed for seamless repairs.

Most colors achieve full coverage in 2 coats, but some colors may require 3 or more coats.

Yes, Awlcraft 3000 can be buffed after curing to improve gloss and blend repairs.

Awlcraft 3000 must be mixed 2:1 by volume (Base to Awlcat #2 G3010 Converter) before reducer is added.

Use an air-atomized spray gun with a 1.0–1.2 mm fluid tip and 29–36 psi air pressure.

Minimum recoat time is 30–60 minutes depending on temperature, with full cure at 21 days.

Awlcraft 3000 is considered the upgraded system with improved color depth and modern pigment technology.