High Build Epoxy Primer D8002

The High Build Epoxy Primer D8002 is a powerful two-component epoxy surfacer that caters to projects requiring high build and filling. This exceptional product is not suitable for use below the waterline.

When it comes to surfacing over other Awlgrip Primers and fairing compounds, the High Build Epoxy Primer D8002 truly excels. While it is possible to apply this primer directly to properly prepared wood or fiberglass surfaces, the best results are obtained by first sealing these surfaces with 545 Primer. For gelcoat/fiberglass surfaces, it is recommended to sand with 100-150 grit paper, while wood surfaces should be smoothed with 80-100 grit paper.

One of the standout features of this primer is its easy mixing and reduction process. One part Base is mixed with an equal part Converter to create a smooth, homogenous mixture. After mixing, it is essential to allow an induction time of 15 minutes. For optimal results, the primer should be reduced by 10-20% with an appropriate reducer. As an example, 8 oz. of Base should be mixed with 8 oz. of D3002 and 3.2 oz. of T0176. Anticipated pot life at 77°F(25°C)/50% R.H is 8 hours, although it's important to note that higher temperatures may shorten the pot life.

The application process for the High Build Epoxy Primer D8002 is equally impressive. When spraying, it is recommended to apply the primer in even coats of 8-10 mils (200-250 microns) wet film thickness, which yields a dry film thickness (DFT) of 4-5 mils (100-125 microns). Depending on the specific project requirements, 2-3 coats of primer may be necessary. It is crucial not to apply this primer to surfaces that are warmer than 105°F (41°C) or colder than 55°F (13°C). Additionally, it is not advisable to attempt to cure the product at temperatures below 55°F (13°C). Please note that the High Build Epoxy Primer D8002 is not recommended for roll-and-tip application.

Lastly, it is important to heed the warning that this primer should not be applied to paint materials. It is crucial to follow all safety guidelines and application instructions provided by Awlgrip.

In conclusion, the High Build Epoxy Primer D8002 is a superb choice for projects requiring maximum build and filling. Its compatibility with other Awlgrip Primers and fairing compounds, ease of use during mixing and reduction, as well as its exceptional application properties, make it a must-have product for any surface refinishing project. Remember to download our free resources titled "Useful Downloads" for additional information and guidance. Awlgrip's High Build Epoxy Primer D8002 is your solution for achieving outstanding results.