STARKE LIQUID KRAKEN GRAPHENE NANO COATING

In stock
SKU
STARKEKRAKENNANO100ML
$265.00
Quick Overview

Liquid Kraken is a true marine grade graphene coating that is formulated specifically for gel coat and marine paints. The low VOC solvent based formula carries a high concentration of graphene oxide which forms a monolithic layer of protection one atom thick. This ultra slick finish is known to reduce water spotting by approximately 50%.

Reduced water spotting is the number one selling point on why a boat owner would select a Liquid Kraken over a SiO2 based coating like Liquid Thor.

SiO2 and Graphene based coatings have relatively the same level of gloss and durability. The life span of the coating will be a function of how often the vessel is used, stored and maintained. A general time frame would be roughly up to 12 to 24 months of protection before you would need reapplication.

0
Rating:
0% of 100
Write Your Own Review
You're reviewing:STARKE LIQUID KRAKEN GRAPHENE NANO COATING
Your Rating
Customer Questions
Which products would you use to buff and polish your boat?
Presta Gelcoat Compound: Ideal for restoring the finish on gelcoat surfaces, this compound effectively removes oxidation and imperfections, leaving a smooth, high-gloss finish. Presta Chroma Ultra Polish: This product...
What’s the proper sanding and wet-sanding grit progression to finish gel coat before buffing?
What’s the proper sanding and wet-sanding grit progression to finish gel coat before buffing? Confirm cure & film build: Only sand fully cured gel coat. If the film is thin (e.g., small repair), start with finer grits to avoid...
What pads, compounds, and polishes should I use after wet-sanding gel coat?
What pads, compounds, and polishes should I use after wet-sanding gel coat? Compounding (cut): Use a wool cutting pad (Buff and Shine®) with a quality marine cutting compound (Starke® or Presta®). ...
Please, mind that only logged in users can submit questions