Home
AwlCraft 2000 Acrylic Urethane Topcoat ( GALLONS )

Skip to the end of the images gallery

Skip to the beginning of the images gallery

AwlCraft 2000 Acrylic Urethane Topcoat ( GALLONS )

Be the first to review this product

In stock

SKU

19-AC-1

As low as $254.07

Ship to

Calculate Shipping Cost

Country

State/Province

Zip/Postal Code

Qty

Quick Overview

AWLCRAFT 2000 ACRYLIC URETHANE TOPCOAT - PART "A" ONLY Awlcraft 2000 is a two component, fast drying acrylic urethane coating with long lasting gloss and color retention. Provides an easy to apply, buffable finish. Spray application only. Do not use below the waterline. Product is sold by the quart or gallon. SPRAY: Mix by volume two parts of AWLCRAFT 2000 Topcoat Base Component with one part AWL-CAT#2/G3010 Spray Converter to a smooth, homogenous mixture. Reduce 25%-33% with the spray reducer appropriate for conditions. Overall mix is 2:1:3/4-1 by volume.25% reduction is a standard mix. Clear coats, metallic colors, and painting in high temperature conditions may require additional reduction. 40% reduction is the maximum recommendation.

Details

Awlcraft 2000 is a fast drying, acrylic urethane high gloss topcoat for an easy-to-apply, high gloss finish. Watch how to spray it HERE: https://www.youtube.com/watch?v=BjZcgA55P3g

More Information

More Information
Manufacturer	AWLGRIP

Reviews

Product Questions (13)

Customer Questions

What are the mix ratios for Awlgrip rolling and tipping?

Brush/Roller: Mix by volume two parts Awlgrip Topcoat Base Component with one part Awlcat #3/H3002 Brushing Converter until one smooth, homogenous mixture is obtained. Reduce 10-33% with T0031. Overall mix is 2:1:⅓-1 by volume (8 oz. Base, 4 oz. H3002...

What is the mix ratio for spraying Awlgrip?

Mix by volume one part Awlgrip Topcoat base component with one part Awlcat #2 (G3010) spray converter to a smooth, homogenous mixture. Reducer addition level required to achieve 11-14 seconds viscosity DIN4 or equivalent (16-18 seconds viscosity Zahn...

What is the mix ratio for mixing Awlcraft 2000?

Mix by volume two parts Awlcraft 2000 Base with one part Awlcat #2 (G3010) Spray Converter to a smooth, homogenous mixture.
Reducer addition level required to achieve 11-14 seconds viscosity DIN4 or equivalent (16-18 seconds viscosity Zahn 2) varies...

Which Awlgrip colors can Fiberglass Florida make?

We are set up to make any of the awlgrip, awlcraft 2000, and awlcraft se colors. We do stock some premade colors as well. Just call us and we can make what you need! Both locations have the ability to make colors.

What grit should I sand for Awlgrip 545 and before the topcoat

Long answer Before primer (545): Block and finish sand to 180 grit so the primer has consistent tooth and builds smoothly. After 545 primer: Once cured per the TDS, sand the primed surface to

What is Awlgrip Fairing Compound used for?

Long answer: Awlgrip fairing compounds are lightweight epoxy fillers designed to fair hulls, decks, and composite parts. They are applied after laminating and before priming to correct surface irregularities. Once cured and sanded, the...

What is Awlcraft 3000?

Awlcraft 3000 is a premium, spray-applied polyurethane topcoat designed for high-gloss marine finishes. It delivers vibrant, true-to-life color depth and exceptional clarity for yacht hulls, topsides, and superstructures. Unlike traditional linear...

Is Awlcraft 3000 repairable?

Yes. Awlcraft 3000 is specifically designed to be repairable and buffable. Minor scratches, surface damage, and localized defects can be sanded and recoated using proper blending techniques. Repairs typically involve sanding the damaged area, applying...

How many coats of Awlcraft 3000 are required?

Most Awlcraft 3000 colors achieve full opacity in two coats when properly applied. However, certain colors — especially lighter shades, pastels, and some grays — may require three or more coats to achieve complete hide and uniform depth. Each coat...

Can Awlcraft 3000 be buffed and polished

Yes. Once fully cured, Awlcraft 3000 can be buffed and polished to enhance gloss and help blend repaired areas into the surrounding finish. Buffing is often optional after proper blending, but it can further refine the surface appearance. For best...

What is the correct mix ratio for Awlcraft 3000?

Awlcraft 3000 requires a 2:1 mix ratio by volume — two parts Awlcraft 3000 Base to one part Awlcat #2 (G3010) Spray Converter. After mixing the base and converter to a smooth, homogenous consistency, reducer is added to achieve proper spray viscosity...

Is Awlcraft 3000 better than Awlcraft 2000?

Awlcraft 3000 is the newer generation of the Awlcraft line and includes improvements in color richness and consistency. It uses enhanced toner technology to produce truer, more vibrant colors. While Awlcraft 2000 remains a proven and reliable system...

What Is Awlcraft 3000 and How Does It Improve Marine Topcoat Performance?

What Is Awlcraft 3000 and How Does It Improve Marine Topcoat Performance? Awlcraft 3000 is the latest innovation from Awlgrip, designed to provide the highest level of gloss, color depth, and durability in marine topcoat...

New customer? Start Here.

AwlCraft 2000 Acrylic Urethane Topcoat ( GALLONS )

Order With Confidence

Validate your login