Home
AwlCraft 3000 Clear TF0300

Skip to the end of the images gallery

Skip to the beginning of the images gallery

AwlCraft 3000 Clear TF0300

Be the first to review this product

In stock

SKU

tf0300

As low as $83.86

Ship to

Calculate Shipping Cost

Country

State/Province

Zip/Postal Code

Qty

Quick Overview

Awlcraft 3000 Clear (TF0300)

Premium two-part polyurethane clearcoat for professional marine finishes. Sprays easy, dries fast, and delivers a deep, high-gloss surface that’s durable and easy to repair across a wide range of climates (mix 2:1 with Awlcat #2 (G3010); reduce with T0001–T0005)

High-gloss, easy to maintain & repair:contentReference
Optimized for spray over Awlcraft SE basecoat:
Typical 3-coat application; fast flash between coats

Details

Awlcraft 3000 Clear (TF0300) – Professional Marine Polyurethane Clearcoat

Awlcraft 3000 Clear (TF0300) is a premium two-component polyurethane clear engineered for professional yacht and marine refinishing. It lays down with excellent flow and leveling, dries quickly, and delivers a deep, wet-look gloss that’s straightforward to maintain and repair in a wide range of climates.

Why Pros Choose Awlcraft 3000 Clear

Brilliant high gloss and depth for a showroom finish
Fast drying between coats for efficient turnarounds
Easy repair & maintenance to keep topsides looking new
Optimized for use over Awlcraft SE basecoats

How to Mix & Spray (At-a-Glance)

Mix ratio: 2:1 by volume (TF0300 Base : Awlcat #2 G3010 Converter)
Reducer (spray): T0001 / T0002 / T0003 / T0005, typically up to ~33%
Application: 3 coats total; 15–45 min flash after coat 1, 30–45 min between coats 2–3
Spray setup (air atomized): 1.0–1.2 mm tip; ~2–2.5 bar (29–36 psi)

Key Specs

Volume solids: 44.3% (unthinned)
Theoretical coverage: ~533.7 ft²/gal per coat
Pot life: ~7 hours
Tape-free: ~24 hours @ 77°F; full cure: ~21 days
Base/Converter packs: 1 Qt & 1 Gal kits available

Surface Prep & Compatibility

Apply Awlcraft 3000 Clear over clean, dust-free Awlcraft SE basecoats. For recoating over Awlcraft 2000 or 3000, sand to remove gloss with P400 and clean with Awlgrip Surface Cleaner (T0170/T0340) before spraying.

More Information

More Information
Manufacturer	AWLGRIP

Reviews

Product Questions (12)

Customer Questions

What are the mix ratios for Awlgrip rolling and tipping?

Brush/Roller: Mix by volume two parts Awlgrip Topcoat Base Component with one part Awlcat #3/H3002 Brushing Converter until one smooth, homogenous mixture is obtained. Reduce 10-33% with T0031. Overall mix is 2:1:⅓-1 by volume (8 oz. Base, 4 oz. H3002...

What is the mix ratio for spraying Awlgrip?

Mix by volume one part Awlgrip Topcoat base component with one part Awlcat #2 (G3010) spray converter to a smooth, homogenous mixture. Reducer addition level required to achieve 11-14 seconds viscosity DIN4 or equivalent (16-18 seconds viscosity Zahn...

What grit should I sand for Awlgrip 545 and before the topcoat

Long answer Before primer (545): Block and finish sand to 180 grit so the primer has consistent tooth and builds smoothly. After 545 primer: Once cured per the TDS, sand the primed surface to

What is Awlgrip Fairing Compound used for?

Long answer: Awlgrip fairing compounds are lightweight epoxy fillers designed to fair hulls, decks, and composite parts. They are applied after laminating and before priming to correct surface irregularities. Once cured and sanded, the...

What is Awlcraft 3000?

Awlcraft 3000 is a premium, spray-applied polyurethane topcoat designed for high-gloss marine finishes. It delivers vibrant, true-to-life color depth and exceptional clarity for yacht hulls, topsides, and superstructures. Unlike traditional linear...

Is Awlcraft 3000 repairable?

Yes. Awlcraft 3000 is specifically designed to be repairable and buffable. Minor scratches, surface damage, and localized defects can be sanded and recoated using proper blending techniques. Repairs typically involve sanding the damaged area, applying...

How many coats of Awlcraft 3000 are required?

Most Awlcraft 3000 colors achieve full opacity in two coats when properly applied. However, certain colors — especially lighter shades, pastels, and some grays — may require three or more coats to achieve complete hide and uniform depth. Each coat...

Can Awlcraft 3000 be buffed and polished

Yes. Once fully cured, Awlcraft 3000 can be buffed and polished to enhance gloss and help blend repaired areas into the surrounding finish. Buffing is often optional after proper blending, but it can further refine the surface appearance. For best...

What is the correct mix ratio for Awlcraft 3000?

Awlcraft 3000 requires a 2:1 mix ratio by volume — two parts Awlcraft 3000 Base to one part Awlcat #2 (G3010) Spray Converter. After mixing the base and converter to a smooth, homogenous consistency, reducer is added to achieve proper spray viscosity...

What are the recoat and cure times for Awlcraft 3000?

Awlcraft 3000 recoat times vary by temperature: Minimum Recoat Time: 30–60 minutes Maximum Recoat Window: 24 hours If more than 24 hours have passed, sanding is required before recoating. Full cure time is 21 days at standard temperatures...

Is Awlcraft 3000 better than Awlcraft 2000?

Awlcraft 3000 is the newer generation of the Awlcraft line and includes improvements in color richness and consistency. It uses enhanced toner technology to produce truer, more vibrant colors. While Awlcraft 2000 remains a proven and reliable system...

What Is Awlcraft 3000 and How Does It Improve Marine Topcoat Performance?

What Is Awlcraft 3000 and How Does It Improve Marine Topcoat Performance? Awlcraft 3000 is the latest innovation from Awlgrip, designed to provide the highest level of gloss, color depth, and durability in marine topcoat...

We found other products you might like!

New customer? Start Here.