D3002 is an epoxy primer converter used with Awlgrip® High Build Epoxy Primer bases to create a high-build, sandable surfacer designed for filling, leveling, and fairing above-waterline marine surfaces.

What primer bases work with D3002?

D3002 is designed for use with Awlgrip® D8002 Off-White and D9002 Yellow High Build Epoxy Primer bases.

Mix D3002 at a 1:1 ratio by volume with the appropriate Awlgrip® High Build Epoxy Primer base. Allow a 15-minute induction time before application.

Where is D3002 typically used?

D3002 is commonly used above the waterline for fairing and surface preparation on fiberglass, gelcoat, wood, and previously primed substrates.

Account

Home
2 Part Paints
HIgh Build Epoxy Converter D3002

Skip to the end of the images gallery

Skip to the beginning of the images gallery

HIgh Build Epoxy Converter D3002

Be the first to review this product

In stock

SKU

D3002

As low as $48.34

Ship to

Calculate Shipping Cost

Country

State/Province

Zip/Postal Code

Qty

Quick Overview

D3002 High Build Epoxy Primer Converter is a VOC-exempt epoxy converter designed for use with Awlgrip® High Build Epoxy Primer bases (D8002 or D9002). It delivers excellent film build, filling capability, and sandability, making it ideal for fairing and surface leveling above the waterline.

Details

Product Overview

D3002 High Build Epoxy Primer Converter is a two-component epoxy polyamide converter formulated for use with Awlgrip® High Build Epoxy Primer bases (D8002 Off-White or D9002 Yellow). When mixed 1:1 by volume, it creates a high-build epoxy surfacer engineered for filling, leveling, and smoothing substrates prior to topcoating.

Key Features & Benefits

VOC-exempt converter in North America when used with approved reducers
Excellent filling and surfacing properties
High film build with strong adhesion
Sands easily for fair, smooth finishes
Compatible with multiple Awlgrip® primer and fairing systems

Typical Applications

Surface leveling and fairing above the waterline
Used over fiberglass, gelcoat, wood, and previously primed surfaces
Ideal as a surfacer prior to epoxy primers, sprayable fairing compounds, or finishing systems

Mixing & Application

Mix Ratio: 1 part base (D8002) : 1 part D3002 by volume
Induction Time: 15 minutes after mixing
Reduction: Reduce 10–20% with approved epoxy reducer
Recommended Application: Conventional, HVLP, or airless spray
Not recommended for roll-and-tip application

Film Build & Coverage

Recommended wet film thickness: 8–10 mils per coat
Recommended dry film thickness: 4–5 mils per coat
2–3 coats may be applied depending on build requirements

Recoating & Compatibility

After proper cure and sanding, surfaces primed with D3002-activated High Build Epoxy Primer may be overcoated with Awlgrip® 545 Epoxy Primer, ULTRA BUILD, Sprayable Fairing Compounds, AWL®FAIR LW, or AWL®QUIK. Sanding is recommended if recoating exceeds the maximum open window.

Important Notes

For above-waterline use only
Always follow Awlgrip® application and safety guidelines
Actual coverage and performance may vary based on application method and conditions

More Information

More Information
AwlGrip Application Guide	AwlGrip Application Guide goes here

Reviews

Product Questions (12)

Customer Questions

What are the mix ratios for Awlgrip rolling and tipping?

Brush/Roller: Mix by volume two parts Awlgrip Topcoat Base Component with one part Awlcat #3/H3002 Brushing Converter until one smooth, homogenous mixture is obtained. Reduce 10-33% with T0031. Overall mix is 2:1:⅓-1 by volume (8 oz. Base, 4 oz. H3002...

What is the mix ratio for spraying Awlgrip?

Mix by volume one part Awlgrip Topcoat base component with one part Awlcat #2 (G3010) spray converter to a smooth, homogenous mixture. Reducer addition level required to achieve 11-14 seconds viscosity DIN4 or equivalent (16-18 seconds viscosity Zahn...

How to Use Awlgrip 545 Epoxy Primer: A Comprehensive Guide

Awlgrip 545 Epoxy Primer is a high-quality, epoxy-based primer designed to provide a strong foundation for topcoats in marine and industrial applications. This primer is known for its excellent adhesion properties, corrosion resistance...

What grit should I sand for Awlgrip 545 and before the topcoat

Long answer Before primer (545): Block and finish sand to 180 grit so the primer has consistent tooth and builds smoothly. After 545 primer: Once cured per the TDS, sand the primed surface to

What is Awlgrip Fairing Compound used for?

Long answer: Awlgrip fairing compounds are lightweight epoxy fillers designed to fair hulls, decks, and composite parts. They are applied after laminating and before priming to correct surface irregularities. Once cured and sanded, the...

What is Awlcraft 3000?

Awlcraft 3000 is a premium, spray-applied polyurethane topcoat designed for high-gloss marine finishes. It delivers vibrant, true-to-life color depth and exceptional clarity for yacht hulls, topsides, and superstructures. Unlike traditional linear...

Is Awlcraft 3000 repairable?

Yes. Awlcraft 3000 is specifically designed to be repairable and buffable. Minor scratches, surface damage, and localized defects can be sanded and recoated using proper blending techniques. Repairs typically involve sanding the damaged area, applying...

How many coats of Awlcraft 3000 are required?

Most Awlcraft 3000 colors achieve full opacity in two coats when properly applied. However, certain colors — especially lighter shades, pastels, and some grays — may require three or more coats to achieve complete hide and uniform depth. Each coat...

Can Awlcraft 3000 be buffed and polished

Yes. Once fully cured, Awlcraft 3000 can be buffed and polished to enhance gloss and help blend repaired areas into the surrounding finish. Buffing is often optional after proper blending, but it can further refine the surface appearance. For best...

What is the correct mix ratio for Awlcraft 3000?

Awlcraft 3000 requires a 2:1 mix ratio by volume — two parts Awlcraft 3000 Base to one part Awlcat #2 (G3010) Spray Converter. After mixing the base and converter to a smooth, homogenous consistency, reducer is added to achieve proper spray viscosity...

Is Awlcraft 3000 better than Awlcraft 2000?

Awlcraft 3000 is the newer generation of the Awlcraft line and includes improvements in color richness and consistency. It uses enhanced toner technology to produce truer, more vibrant colors. While Awlcraft 2000 remains a proven and reliable system...

What Is Awlcraft 3000 and How Does It Improve Marine Topcoat Performance?

What Is Awlcraft 3000 and How Does It Improve Marine Topcoat Performance? Awlcraft 3000 is the latest innovation from Awlgrip, designed to provide the highest level of gloss, color depth, and durability in marine topcoat...

New customer? Start Here.