STARKE YELLOW MONEY PAD | Fiberglass Florida

In stock
SKU
STARKEMONEYPAD6
As low as $16.99
Quick Overview

The plush natural wool fibers of STARKE Yellow Wool Polishing Pads make polishing effortless when used with Long Throw Random Orbital / Dual Action Polishers. The natural fibers lightly polish away fine defects and create a high-gloss finish, while the yellow foam support allows for the pad to easily conform to shapes and contours. Unlike foam which can haze a Gel Coated Surface when polishing, true wool will won't and will leave you with a better result. Finish with STARKE Elevate on lighter color gel and STARKE Triple P on Darker color gel is recommended on a Long Throw Random Orbital or Dual Action Polishers. Ideal for all gel coal and paint finishes.

Unlike foam which can haze a Gel Coated Surface when polishing, true wool will won't and will leave you with a better result. Finish with STARKE Elevate on lighter color gel and STARKE Triple P on Darker color gel is recommended on a Long Throw Random Orbital or Dual Action Polishers. Ideal for all gel coal and paint finishes.

0
Rating:
0% of 100
Write Your Own Review
You're reviewing:STARKE YELLOW MONEY PAD | Fiberglass Florida
Your Rating
Customer Questions
Which products would you use to buff and polish your boat?
Presta Gelcoat Compound: Ideal for restoring the finish on gelcoat surfaces, this compound effectively removes oxidation and imperfections, leaving a smooth, high-gloss finish. Presta Chroma Ultra Polish: This product...
What’s the proper sanding and wet-sanding grit progression to finish gel coat before buffing?
What’s the proper sanding and wet-sanding grit progression to finish gel coat before buffing? Confirm cure & film build: Only sand fully cured gel coat. If the film is thin (e.g., small repair), start with finer grits to avoid...
What pads, compounds, and polishes should I use after wet-sanding gel coat?
What pads, compounds, and polishes should I use after wet-sanding gel coat? Compounding (cut): Use a wool cutting pad (Buff and Shine®) with a quality marine cutting compound (Starke® or Presta®). ...
Please, mind that only logged in users can submit questions