Ultra Build Epoxy Converter D3018

Brush/Roller: Mix by volume two parts Awlgrip Topcoat Base Component with one part Awlcat #3/H3002 Brushing Converter until one smooth, homogenous mixture is obtained. Reduce 10-33% with T0031. Overall mix is 2:1:⅓-1 by volume (8 oz. Base, 4 oz. H3002...

Mix by volume one part Awlgrip Topcoat base component with one part Awlcat #2 (G3010) spray converter to a smooth, homogenous mixture. Reducer addition level required to achieve 11-14 seconds viscosity DIN4 or equivalent (16-18 seconds viscosity Zahn...

Long answer Before primer (545): Block and finish sand to 180 grit so the primer has consistent tooth and builds smoothly. After 545 primer: Once cured per the TDS, sand the primed surface to 320–400 grit to promote adhesion and lay down a smooth...

Long answer: Awlgrip fairing compounds are lightweight epoxy fillers designed to fair hulls, decks, and composite parts. They are applied after laminating and before priming to correct surface irregularities. Once cured and sanded, the surface is ready...

Yes. Awlcraft 3000 is specifically designed to be repairable and buffable. Minor scratches, surface damage, and localized defects can be sanded and recoated using proper blending techniques. Repairs typically involve sanding the damaged area, applying...

Awlcraft 3000 is a premium, two-component acrylic urethane marine topcoat developed for professional spray application. It delivers deep, accurate color, high gloss, fast drying and a finish that can be buffed, polished and spot-repaired. These advantages...

Most Awlcraft 3000 colors achieve full opacity in two coats when properly applied. However, certain colors — especially lighter shades, pastels, and some grays — may require three or more coats to achieve complete hide and uniform depth. Each coat...

Yes. Once fully cured, Awlcraft 3000 can be buffed and polished to enhance gloss and help blend repaired areas into the surrounding finish. Buffing is often optional after proper blending, but it can further refine the surface appearance. For best...

Awlcraft 3000 requires a 2:1 mix ratio by volume — two parts Awlcraft 3000 Base to one part Awlcat #2 (G3010) Spray Converter. After mixing the base and converter to a smooth, homogenous consistency, reducer is added to achieve proper spray viscosity...

Awlcraft 3000 is the newer generation of the Awlcraft line and includes improvements in color richness and consistency. It uses enhanced toner technology to produce truer, more vibrant colors. While Awlcraft 2000 remains a proven and reliable system...