Search results for: 'condit applicati'

Fiberglass & Gelcoat Technical Support Fiberglass and gelcoat work demands the right materials, proper technique, and an understanding of how each layer in the system works together. Whether you’re making repairs, building a mold, or producing parts, Fiberglass Florida provides technical guidance built on real-world experience. Our team supports professionals and serious DIY builders working with polyester, vinyl ester, and epoxy systems. We help you select compatible products, apply them corre...

Professional Awlgrip Guidance — Explained Clearly Awlgrip coatings are professional-grade marine finishes. When applied correctly, they deliver unmatched durability and appearance — but they are also process-sensitive. Our technical guidance follows the same application principles outlined in Awlgrip’s official application documentation, translated into clear, real-world advice for boat owners, repair shops, and first-time painters. Common Awlgrip Application Issues We Hel...

Mold Building & Tooling Technical Support Building a high-quality fiberglass mold requires more than just materials — it requires proper surface preparation, correct tooling products, and disciplined process control. Fiberglass Florida provides hands-on technical guidance for professional mold builders, boat repair yards, and composite manufacturers using proven composite tooling methods focused on surface quality, dimensional stability, and long-term mold performance...

Open Molding & Lamination Technical Support Open molding and hand lay-up remain some of the most widely used fiberglass manufacturing methods in marine, industrial, and composite fabrication. Successful lamination depends on selecting the correct laminating resin and understanding how resin formulation, processing behavior, and cure characteristics affect the finished composite part. What Are Laminating Resins? Laminating resins are polyes...

Hand Laminating & Spray-Up Technical Support Hand laminating and spray-up are two of the most common open molding processes used in fiberglass fabrication. While both methods rely on similar materials, success depends on understanding the differences in application technique, resin behavior, and process control. At Fiberglass Florida, we provide technical support to help fabricators, repair yards, and builders choose the right laminating method and materials for their project — a...

Polyester vs Vinyl Ester Resin: Understanding the Differences Choosing the correct resin is one of the most important decisions in fiberglass lamination. Polyester and vinyl ester resins are both widely used in open molding, hand lay-up, and spray-up applications, but they offer different performance, durability, and cost characteristics. Understanding how these resin systems differ will help you select the right material for your project, environment, and performance requirements. ...

Preparing Gelcoat for Awlgrip Paint Systems When applying Awlgrip or Awlcraft coatings over fiberglass boats, proper preparation of existing or new gelcoat is critical for long-term adhesion and finish quality. Most adhesion failures in marine paint systems occur because of poor surface preparation rather than product failure. Why Gelcoat Preparation Matters Before applying Awlgrip systems the gelcoat surface must be: Free of wax and contamination Properly sanded to ...

Boat Restoration Technical Support Guide Last updated: February 2026 Boat restoration is the process of repairing, rebuilding, and refinishing fiberglass boats to restore structural integrity, appearance, and long-term performance. This technical support guide serves as a master reference for understanding materials, repair methods, and best practices used in modern fiberglass boat restoration. This page is designed as a living knowledge base. Each section below will continue ...

Awlcraft 3000 Technical Support Guide Awlcraft 3000 is a professional-grade, two-component polyurethane marine topcoat designed for high-gloss yacht finishes. This guide covers mixing ratios, spray setup, film thickness, drying times, repairs, maintenance, and common contractor questions. If you are spraying Awlcraft 3000 and need technical clarity, this is your complete support resource. What Is Awlcraft 3000? Short Answer: Awlcraft 3000 is a buffable, repairable, high-gloss p...

Awlgrip & Marine Paint Technical Support Awlgrip systems are precision coatings where surface preparation, product selection, and application technique all matter. We help painters and boat owners achieve consistent, professional results. This section focuses on system compatibility, proper sequencing, and real-world application guidance for Awlgrip, Awlcraft, primers, converters, reducers, and maintenance products. Understanding the Awlgrip System Awlgrip is not just paint — it i...

Awlgrip Yacht Paint Application Guide Complete professional guide to surface preparation, priming, fairing, and applying Awlgrip marine coatings. Built for boat builders, professional painters, and first-time users who want a flawless finish. Guide Contents Overview of Awlgrip Coating Systems Surface Preparation Fundamentals Preparing Fiberglass & Gelcoat Preparing Aluminum Preparing Steel Preparing Wood Fairing Compounds & Surface Correction...

Preparing Previously Painted Surfaces for Awlgrip Many boat refinishing projects involve applying new coatings over previously painted surfaces. Proper inspection, cleaning, and sanding of existing paint systems is critical to ensure long-term adhesion and professional finish quality. The condition of the existing coating determines whether it can be recoated directly or if removal and full surface preparation are required. Evaluate the Existing Paint System Before beginning...

Max Cor CF Epoxy Primer (Controlled Fusion Technology) How and Why to Use Max Cor CF Max Cor CF Epoxy Primer is a high-performance, chromate-free corrosion primer engineered for aluminum and steel in marine and industrial environments. Designed with Controlled Fusion Technology, it chemically bonds to properly prepared metal surfaces to create a durable, corrosion-resistant foundation for subsequent coatings. This system is ideal for aluminum boats, towers, structural components, a...

MEKP Catalyst Calculator & Mixing Guide (oz, mL, cc) MEKP Catalyst (Methyl Ethyl Ketone Peroxide) is used to cure polyester resin, vinyl ester resin, and gelcoat. The correct mix ratio is critical to ensure proper curing, strength, and finish quality. Standard mix: 1.5% MEKP (about 2 oz per gallon of resin). Important Mixing Notes This information is based on MEKP 925 and tested at 77°F (25°C) . These are estimates and may vary depending on the resin system, shop conditions, and ap...