Search results for: 'Ratio'

Awlgrip & Marine Paint Technical Support Awlgrip systems are precision coatings where surface preparation, product selection, and application technique all matter. We help painters and boat owners achieve consistent, professional results. This section focuses on system compatibility, proper sequencing, and real-world application guidance for Awlgrip, Awlcraft, primers, converters, reducers, and maintenance products. Understanding the Awlgrip System Awlgrip is not just paint — it i...

Awlcraft 3000 Technical Support Guide Awlcraft 3000 is a professional-grade, two-component polyurethane marine topcoat designed for high-gloss yacht finishes. This guide covers mixing ratios, spray setup, film thickness, drying times, repairs, maintenance, and common contractor questions. If you are spraying Awlcraft 3000 and need technical clarity, this is your complete support resource. What Is Awlcraft 3000? Short Answer: Awlcraft 3000 is a buffable, repairable, high-gloss p...

Professional Awlgrip Guidance — Explained Clearly Awlgrip coatings are professional-grade marine finishes. When applied correctly, they deliver unmatched durability and appearance — but they are also process-sensitive. Our technical guidance follows the same application principles outlined in Awlgrip’s official application documentation, translated into clear, real-world advice for boat owners, repair shops, and first-time painters. Common Awlgrip Application Issues We Hel...

Fiberglass & Gelcoat Technical Support Fiberglass and gelcoat work demands the right materials, proper technique, and an understanding of how each layer in the system works together. Whether you’re making repairs, building a mold, or producing parts, Fiberglass Florida provides technical guidance built on real-world experience. Our team supports professionals and serious DIY builders working with polyester, vinyl ester, and epoxy systems. We help you select compatible products, apply them corre...

Please replace this text with you Privacy Policy. Please add any additional cookies your website uses below (e.g. Google Analytics). This privacy policy sets out how this website (hereafter "the Store") uses and protects any information that you give the Store while using this website. The Store is committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be i...

Welcome to Fiberglass Florida! For over 30 years, Fiberglass Florida has been your trusted source for all things fiberglass. Whether you’re embarking on a small project or a large-scale endeavor, we provide everything you need to achieve success. Our extensive inventory includes epoxies, resins, gel coats, fiberglass knits and wovens, and the renowned AwlGrip paints, ensuring you have the right materials for any job. Our expertise extends across multiple industries, including boat building...

  This privacy policy sets out how Fiberglass Florida uses and protects any information that you give Fiberglass Florida when you use this website. Fiberglass Florida is committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement. Fiberglass Florida may change this policy from time to time by updating this page...

TERMS OF SERVICE ---- OVERVIEW This website is operated by Fiberglass Florida. Throughout the site, the terms “we”, “us” and “our” refer to Fiberglass Florida. Fiberglass Florida offers this website, including all information, tools and services available from this site to you, the user, conditioned upon your acceptance of all terms, conditions, policies and notices stated here. By visiting our site and/ or purchasing something from us, you engage in our “Service” and agree to be ...

Gelcoat: What It Is, How It’s Used, and How to Repair It Gelcoat is the outermost protective and cosmetic layer used on fiberglass parts. Understanding how gelcoat works — and how to apply or repair it correctly — is critical to achieving long-lasting performance and professional results. What Is Gelcoat? Gelcoat is a pigmented polyester or vinyl ester resin applied to the surface of fiberglass parts. It creates a smooth, high-gloss finish while protecting the underlying laminate from wat...

Fiberglass Florida: Awlcraft 3000 – The Next Generation of Yacht Topcoats Awlcraft 3000 is the newest evolution in the Awlgrip® family of marine coatings. Designed as a next-generation acrylic urethane topcoat , it offers a perfect balance of brilliant color, high-gloss retention, and easy repairability . Professional applicators worldwide trust it as the modern standard for yacht finishing. Why Awlcraft 3000 Is Different Next-Level Technology: Builds on decades of Awlgrip innovat...

Technical Support & Expert Guidance Working with fiberglass, gelcoat, and marine coatings requires the right materials, correct procedures, and real-world experience. At Fiberglass Florida, technical support is part of what we do every day. Our team works directly with boat builders, repair yards, manufacturers, and serious DIY builders to solve real-world problems using proven materials and practical methods. Call Technical Support Send Us a Message ...

Mold Building & Tooling Technical Support Building a high-quality fiberglass mold requires more than just materials — it requires proper surface preparation, correct tooling products, and disciplined process control. Fiberglass Florida provides hands-on technical guidance for professional mold builders, boat repair yards, and composite manufacturers using proven composite tooling methods focused on surface quality, dimensional stability, and long-term mold performance...

Open Molding & Lamination Technical Support Open molding and hand lay-up remain some of the most widely used fiberglass manufacturing methods in marine, industrial, and composite fabrication. Successful lamination depends on selecting the correct laminating resin and understanding how resin formulation, processing behavior, and cure characteristics affect the finished composite part. What Are Laminating Resins? Laminating resins are polyes...

Hand Laminating & Spray-Up Technical Support Hand laminating and spray-up are two of the most common open molding processes used in fiberglass fabrication. While both methods rely on similar materials, success depends on understanding the differences in application technique, resin behavior, and process control. At Fiberglass Florida, we provide technical support to help fabricators, repair yards, and builders choose the right laminating method and materials for their project — a...

Vacuum Infusion Technical Support Vacuum infusion is a closed-mold composite manufacturing process used to produce high-quality fiberglass laminates with precise resin control, improved fiber ratios, and reduced emissions. When set up correctly, infusion delivers consistent, strong, and lightweight parts with excellent surface quality. At Fiberglass Florida, we provide technical support for vacuum infusion projects ranging from small custom parts to large marine and industrial structure...

Preparing Gelcoat for Awlgrip Paint Systems When applying Awlgrip or Awlcraft coatings over fiberglass boats, proper preparation of existing or new gelcoat is critical for long-term adhesion and finish quality. Most adhesion failures in marine paint systems occur because of poor surface preparation rather than product failure. Why Gelcoat Preparation Matters Before applying Awlgrip systems the gelcoat surface must be: Free of wax and contamination Properly sanded to ...

Awlgrip 545 Epoxy Primer Guide 545 Epoxy Primer is the industry standard undercoat primer used in Awlgrip coating systems. It seals surfacing primers and prepares substrates for Awlgrip or Awlcraft topcoats while providing excellent adhesion and corrosion protection. View Full Awlgrip Application Guide Shop Awlgrip Primers Product Overview Key Features Outstanding adhesion to fiberglass, steel, aluminum and wood Corrosion resistant epoxy primer Used above or...

Boat Restoration Technical Support Guide Last updated: February 2026 Boat restoration is the process of repairing, rebuilding, and refinishing fiberglass boats to restore structural integrity, appearance, and long-term performance. This technical support guide serves as a master reference for understanding materials, repair methods, and best practices used in modern fiberglass boat restoration. This page is designed as a living knowledge base. Each section below will continue ...

Awlgrip Yacht Paint Application & Technical Guide Professional yacht finishing procedures, surface preparation standards, and Awlgrip system application guidance. Surface Prep → Fairing → Primer → Topcoat → Cure → Finish Surface Preparation Cleaning procedures, sanding standards, two-cloth solvent wipe method, and contamination removal. View Surface Prep Guide → Primers & Sealers 545 Epoxy Primer...

Awlgrip Surface Preparation Guide Proper surface preparation is the most important step in any Awlgrip paint system. Different substrates require specific cleaning procedures, sanding profiles, and primer systems to achieve proper adhesion and long-t erm durability. Shop Awlgrip Full Application Guide Surface Prep → Primer → Fairing → Primer → Topcoat → Cure Fiberglass Surface Preparation Fiberglass substrates require thorough cleaning and sa...

Awlgrip Yacht Paint Application Guide Complete professional guide to surface preparation, priming, fairing, and applying Awlgrip marine coatings. Built for boat builders, professional painters, and first-time users who want a flawless finish. Guide Contents Overview of Awlgrip Coating Systems Surface Preparation Fundamentals Preparing Fiberglass & Gelcoat Preparing Aluminum Preparing Steel Preparing Wood Fairing Compounds & Surface Correction...

Fiberglass Surface Preparation for Awlgrip Paint Before applying Awlgrip mer or topcoat systems, fiberglass surfaces must be properly cleaned, sanded, and prepared. Contamination such as wax, mold release agents, oil, or oxidation will prevent pricoatings from bonding correctly. Need help with a project? Call our coatings team: 321-639-3046 Quick Answer: How Do You Prep Fiberglass for Awlgrip? Clean the surface to remove wax, oil, grease, and contamination Use t...

Preparing Previously Painted Surfaces for Awlgrip Many boat refinishing projects involve applying new coatings over previously painted surfaces. Proper inspection, cleaning, and sanding of existing paint systems is critical to ensure long-term adhesion and professional finish quality. The condition of the existing coating determines whether it can be recoated directly or if removal and full surface preparation are required. Evaluate the Existing Paint System Before beginning...

Aluminum Surface Preparation Guide This guide outlines the correct preparation and coating systems for aluminum substrates using Awlgrip yacht coating systems. Select Your Aluminum Scenario Aluminum – No Fairing Standard aluminum surfaces where no filler or fairing compounds are required. View System Options Aluminum – Fairing Required Aluminum surfaces requiring filler or fairing compounds for leveling. ...

Steel Surface Preparation Guide Correct surface preparation of steel is critical for long-term coating performance. Removing mill scale, rust, shop primers and contaminants ensures strong adhesion and corrosion protection when applying Awlgrip coating systems. Select Your Steel Surface Scenario Steel (No Fairing Required) Standard steel surfaces where fairing compounds are not required. View System Steel (Fairing Required) ...

Fairing & Surface Repairs Guide Fairing and surface repair is used to correct imperfections in hulls, decks and structures before applying primer and topcoat systems. Proper surface preparation and fairing techniques ensure smooth finishes and long-term coating performance. Select Your Repair Scenario Minor Surface Repairs Small scratches, sanding marks or shallow imperfections. View Repair Method Fairing Large Areas ...

Awlgrip Primers & Sealers Guide Awlgrip primer systems provide corrosion protection, surface filling, and adhesion before applying yacht topcoats. Selecting the correct primer ensures maximum durability and finish quality. View Full Awlgrip Application Guide Shop Awlgrip Primers Select a Primer System 545 Epoxy Primer Multi-purpose corrosion resistant epoxy primer used to seal surfacing primers before applying Awlgrip finishes. View Technical Guide ...

Max Cor CF Epoxy Primer (Controlled Fusion Technology) How and Why to Use Max Cor CF Max Cor CF Epoxy Primer is a high-performance, chromate-free corrosion primer engineered for aluminum and steel in marine and industrial environments. Designed with Controlled Fusion Technology, it chemically bonds to properly prepared metal surfaces to create a durable, corrosion-resistant foundation for subsequent coatings. This system is ideal for aluminum boats, towers, structural components, a...

Hullgard Extra Epoxy Primer Application Guide How and Why to Use Hullgard Extra Hullgard Extra Epoxy Primer is a high-build, anticorrosive substrate primer designed to create a stable foundation for fairing compounds and finishing systems. It is commonly used after corrosion primers like Max Cor CF to build film thickness, improve adhesion, and prepare surfaces for Awlfair and topcoat systems. This primer is ideal for aluminum, steel, and fiberglass substrates where long-term durab...

Mirka Marine Surface Finishing Systems From heavy sanding to high-gloss finishing — complete systems for fiberglass, gelcoat, and marine coatings. About Mirka Mirka Ltd is a global leader in abrasives technology, delivering complete sanding and polishing systems designed to improve surface quality, efficiency, and profitability. ISO 9001 – Quality Assurance ISO 14001 – Environmental Management OHSAS 18001 – Occupational Safety Perfect Surfac...

Fiberglass Fillers Guide: Aerosil, Q Cell, Fairing & Structural Fillers Explained What Are Fiberglass Fillers? Fiberglass fillers are powders, fibers, or pre-mixed compounds used with polyester resin or epoxy resin to create custom mixtures for marine, repair, and composite applications. They are commonly used in: Fiberglass boat repair Marine fairing and surface preparation Composite construction Surfboard building --- Types of Fiberglass Fillers (What to Use and W...

MEKP Catalyst Calculator & Mixing Guide (oz, mL, cc) MEKP Catalyst (Methyl Ethyl Ketone Peroxide) is used to cure polyester resin, vinyl ester resin, and gelcoat. The correct mix ratio is critical to ensure proper curing, strength, and finish quality. Standard mix: 1.5% MEKP (about 2 oz per gallon of resin). Important Mixing Notes This information is based on MEKP 925 and tested at 77°F (25°C) . These are estimates and may vary depending on the resin system, shop conditions, and ap...